background image

EN

6

Please read the following information. 

Otherwise, there may be the risk of 

personal injury or material damage. 

Moreover, any warranty and reliability 

commitment will become void.

General Safety

•  Never place your machine on a carpet 

covered floor. Otherwise, lack of 

airflow from below of your machine 

may cause electrical parts to overheat. 

This may cause problems with your 

washing machine.

•  If the power cable or mains plug is 

damaged you must call Authorized 

Service for repair.

•  Check water hoses for wear. Do not 

use old/used water inlet hoses. These 

may cause stains on your laundry.

•  Fit the drain hose into the discharge 

housing securely to prevent any 

water leakage and to allow machine 

to take in and discharge water as 

required. It is very important that the 

water intake and drain hoses are not 

folded, squeezed, or broken when the 

appliance is pushed into place after it 

is installed or cleaned.

•   Your washing machine is designed to 

continue operating in the event of a 

power interruption. You cannot cancel 

any program by pressing the “On/Off 

button.” Your machine will not resume 

its program when the power restores. 

Press the “Start/Pause/Cancel” button 

for 3 seconds to cancel the program 

(See, Cancelling a Program)

•   There may be some water in your 

machine when you receive it. This is 

from the quality control process and 

is normal. It is not harmful to your 

machine.

•  Some problems you may encounter 

may be caused by the software. Press 

“Start/Pause/Cancel” button for 3 

seconds to cancel the program set 

in your machine before calling the 

authorized service.

First Use

•   To prepare your machine for washing, 

carry out your first washing process 

without loading your machine and 

with detergent under “Cottons 90°C” 

program.

•  Ensure that the cold and hot water 

connections has been made correctly 

when installing your machine. 

Otherwise, your laundry may come 

out hot at the end of the washing 

process and may wear out.

•  If the current fuse or circuit breaker is 

less than 16 Amperes, please have 

a qualified electrician install a 16 

Ampere fuse or circuit breaker.

•  While using with or without a 

transformer, do not neglect to have 

the grounding installation laid by a 

qualified electrician. Our company 

shall not be liable for any damages 

that may arise when the machine is 

used on a line without grounding.

•  To make your machine ready for use, 

please be sure that the tap water 

supply and water drainage systems 

are appropriate before calling the 

authorized service. If they are not, 

call a qualified plumber to have any 

necessary arrangements carried out.

Intended use

•  This product has been designed for 

home use.

•   The appliance may only be used for 

washing and rinsing of textiles that are 

marked accordingly.

•   Only detergents, softeners and 

supplements suitable for washing 

machines may be used.

•   Observe the care instructions labelled 

on textile products and any other 

instructions given by companies that 

produce detergents for your machine.

•   This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

 Warnings

Summary of Contents for WMB 91242 DLSC

































Reviews: