36 / EN
Washing Machine / User’s Manual
4.6.18 Cancelling the programme
Press and hold Start / Pause / Cancel button for 3
seconds. Start symbol flashes. Symbol of the step at
which the programme was cancelled remains lit. „End“
appears on the display and the programme is cancelled.
C
If you want to open the loading door after you have cancelled the programme but it is not
possible to open the loading door since the water level in the machine is above the loading
door opening, then turn the Programme Selection knob to Pump+Spin programme and
discharge the water in the machine.
4.6.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold
mode.
If you want to spin your laundry when the machine is in this mode:
Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears
and Start symbol appears. Programme resumes, discharges the water and spins the
laundry.
If you only want to drain the water without spinning:
Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears.
Programme resumes and discharges the water only.
4.6.20 End of programme
“End” appears on the display at the end of the programme. Symbols of the programme
steps remain lit. Auxiliary function, spin speed and temperature that were selected at the
beginning of the programme remain selected.
4.6.21 Your machine is equipped with a “Standby Mode”
In case of not starting any programme or waiting without making any other operation
when the machine is turned on by On/Off button and while it is in selection step or if no
other operation is performed approximately 2 minutes after the programme you selected
has come to an end, your machine will automatically switch to energy saving mode.
Brightness of indicator lights will decrease. Also, if your product is equipped with a display
showing the programme duration, this display will completely turn off. In case of rotating
the Programme Selection knob or pressing any button, lights and display will restore to
their previous condition. Your selections made while exiting the energy saving mode may
change. Check the appropriateness of your selections before starting the programme.
Readjust if necessary. This is not a fault.