EN / 33
If you turn the programme selection
button when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.
6.14 End of Programme
End warning appears on the display when
the programme is completed.
The product automatically shuts down if no
buttons are pressed for 10 minutes. Display
and all indicators are turned off.
Completed programme steps will be dis-
played if you press the On/Off button.
6.15 HomeWhiz Feature and Remote
Control Function
HomeWhiz enables you to control your
washing machine by using your smart ap-
pliance and get information about the
status of the machine. With HomeWhiz ap-
plication, you can use your smart appliance
to perform various operations on the ma-
chine. Furthermore, you can use some fea-
tures only with HomeWhiz function.
In order to use the Bluetooth feature of your
machine, you must download HomeWhiz
application from the application store of
your smart appliance.
Make sure your smart appliance is connec-
ted to the internet to install the application.
If you are using the application for the first
time, please follow the instructions on the
screen to complete your user account re-
gistration. Once the registration procedure
is complete, you can use all products with
the HomeWhiz feature in your house on
this account.
You can touch the “Appliances” tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz
function enables the washing machine to
send you instant notifications via your
smart appliance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance,
and your washing machine must be
paired with your smart appliance
via Bluetooth. If your washing ma-
chine is not paired to your smart
device it works as an appliance
which does not have a HomeWhiz
feature.
Your product will operate as paired
to your smart device via bluetooth.
The controls made by means of the
application will be enabled through
this pairing. Therefore the
bluetooth signal strength between
the appliance and the smart device
must be adequate.
Please visit
to
see the Android and iOS versions
supported by the HomeWhiz applic-
ation.
All the safety measures described
in "
GENERAL SAFETY INSTRUC-
TIONS
" section of your user
manual apply to the remote opera-
tion through HomeWhiz function as
well
6.15.1 HomeWhiz Setup
In order for the application to run, a connec-
tion between your appliance and the Home-
Whiz Application must be established. For
this connection to be established you must
follow the steps below for setup procedure
on both the appliance and the HomeWhiz
Application.
1. If you are adding a device for the first
time, touch “Appliances” tab on the
HomeWhiz Application. Select “ADD AP-
