EN
20
level in the machine is suitable. Laundry
may be added or taken out by opening
the door. If the “Ready” lamp does not
light up continuously at the end of this
time, the water level in the machine
is not suitable and laundry cannot be
added. You can resume the programme
by pressing the “Start/Pause/Cancel”
button again.
Child-proof lock
There is a childproof lock to prevent
any programme interruption because of
pressing the keys while the programme is
on. In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing programme has started.
1st auxiliary function light will flash
continuously.
To start a new programme after the
programme is over or to interfere the
programme, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the programme through
cancelling
The programme which is selected first will
keep on going even if the position of the
programme selection button is changed.
A new programme can be selected or
started after “Programme is cancelled” in
order to change the washing programme.
To cancel any selected programme;
•
Press “Start/Pause/Cancel” button
for 3 seconds. The machine starts
to discharge the water. “Wash” and
“Spin/End”lights will light up.
•
“Start/Pause/Cancel” and “Wash”
lights will go off after discharging
process is over.
•
“Ready”lamp will light up continuously
when the door is unlocked. You can
select and start a new programme.
•
If the programme is cancelled in the
middle of the process, “Wash”
and “Spin/End ”
lights will
light up. The machine can drain
all the water or can take in water
for 3 times at most to cool down
the clothes and complete draining
process.
End of Programme
The “Spin/End ” lamp on the
programme follow-up indicator will light
up when the programme comes to an end.
The Door is unlocked 2 minutes later, the
“ Spin/End” and “Ready”
lamps will
light up continuously. The machine is
now ready for a second cycle.
Press the “On/Off” button to shut down
the machine.
