Beko WM 8063 CW Installation & Operating Instructions And Washing Guidance Download Page 8

Page: 8 / 40

Installation

Refer to the nearest Authorised Service

Agent for installation of the product. To

make the product ready for use, review

the information in the user manual and

make sure that the electricity, tap water

supply and water drainage systems are

appropriate before calling the Authorized

Service Agent. If they are not, call a

qualified technician and plumber to have

any necessary arrangements carried out.

Preparation of the location and

electrical, tap water and waste water

installations at the place of installation

is under customer's responsibility.

Installation and electrical connections

of the product must be carried out

by the Authorized Service Agent.

Manufacturer shall not be held

liable for damages that may arise

from procedures carried out by

unauthorized persons.

Prior to installation, visually check if

the product has any defects on it. If

so, do not have it installed. Damaged

products cause risks for your safety.

Make sure that the water inlet and

discharge hoses as well as the power

cable are not folded, pinched or

crushed while pushing the product

into its place after installation or

cleaning procedures.

Appropriate installation location

• Place the machine on a rigid floor.

Do not place it on a long pile rug or

similar surfaces.

• Total weight of the washing machine

and the dryer -with full load- when

they are placed on top of each other

reaches to approx. 180 kilograms.

Place the product on a solid and flat

floor that has sufficient load carrying

capacity!

• Do not place the product on the

power cable.

• Do not install the product at places

where temperature may fall below

0ºC.

• Place the product at least 1 cm away

from the edges of other furniture.

Removing packaging

reinforcement

Tilt the machine backwards to remove

the packaging reinforcement. Remove

the packaging reinforcement by pulling

the ribbon.

Removing the

transportation locks

Do not remove the transportation

locks before taking out the

packaging reinforcement.

Remove the transportation safety

bolts before operating the washing

machine, otherwise, the product will

be damaged.

1. Loosen all the bolts with a spanner

until they rotate freely (C).

2. Remove transportation safety bolts

by turning them gently.

Summary of Contents for WM 8063 CW









































Search results

Summary of Contents for WM 8063 CW

Reviews:

Related manuals for WM 8063 CW

Brands by name

Popular brands

Beko WM 8063 CW, Installation & Operating Instructions And Washing Guidance

Search results

Summary of Contents for WM 8063 CW

Reviews:

Related manuals for WM 8063 CW

Brands by name

Popular brands