27 / EN
Washer-Dryer / User’s Manual
• Drying
This function enables drying of the
laundry after washing. Check with which
programmes this auxiliary function can be
selected, from the programme table.
5.12 Drying steps
5.12.1 Iron Dry
Drying is performed until the drying
level reaches Iron Dry step.
5.12.2 Cupboard Dry
Drying is performed until the drying
level reaches Wardrobe Dry step.
5.12.3 Extra Dry
Drying is performed until the drying level
reaches Extra Wardrobe Dry step.
C
INFORMATION
•
Dryness level may change according
to the mixture, material types, amount
and dampness level of the laundry.
•
Items which contain accessories such
as lace, tulle, stones, beads, spacer,
wire, etc. and high silk-content items
should not be dried in the machine.
5.12.4 Time based drying-minutes
In order to reach the desired drying level
at low temperature, you select any of 30,
90 and 150 minutes of drying periods.
C
INFORMATION
•
When drying small amount of laundry
(up to maximum 2 pieces), timed-drying
steps in the Cottons or Synthetics drying
programmes should be selected.
•
If the laundry is not at the desired
dryness level at the end of the drying
programme, timed-drying can be
selected to finish the process.
•
When this function is selected, machine
performs drying for the adjusted time
irrespective of the drying level.
5.13 Time display
Remaining time for the completion of the
programme while it is running is displayed
as “01:30” in hours and minutes format.
C
INFORMATION
•
Programme time may differ from the values
in section “Programme and consumption
table” depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and
the changes at the mains voltage.
5.14 End Time
With the
End Time
function, the startup of the
programme can be delayed up to 24 hours. After
pressing
End Time
button, the programme's
estimated ending time is displayed. If the
End
Time
is adjusted,
End Time
light illuminates.
In order for the End Time function is activated
and the programme is completed at the
end of the specified time, you must press
Start / Pause
button after adjusting the
time.
Start / Pause
button stops flashing
and remains illuminated continuously.
If you want to cancel End Time function,
press
End Time
button until the End
Time light turns off or press
On / Off
button to turn off and on the machine.
1. Open the loading door, place the
laundry and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Set the end time of your choice
by pressing the
End Time
button.
End Time
light is illuminated.
4. Press
Start / Pause
button. Time countdown
starts. “:” symbol in the middle of the
end time on the display starts flashing.