Beko WDB7425R2W, User Manual

Page: 28 / 44

28 / EN
Washer-Dryer / User’s Manual
EN 1 Auxiliary functions Drying level
Programme (°C)
Max.
Load (kg)
W
ater Consumption (l)
Energ
y Consumption (kWh)
Max.
Speed***
Prewash Fast+ Steam Anti- Dr
ying
Extra Dr
y
W
ardrobe Dr
y
Iron Dr
y
Time based dr
ying - minutes
Selectable
temperature
range °C
Cotton Dry -
4 45 3,20
1200
• * • • • •
-
Synthetic Dry -
3 30 2,40 - • * • • •
-
Wash & Dry 60 2 125 4,00 1200 * • * • • • • 90-30
4 Kg Wash & Dry 60
4 75 4,20
1200
• * • • • •
60-Cold
Wash & Wear 30 0,5 30 0,60 1200 • * • 30-Cold
Wash & Wear 30
1 40 1,00 1200 • * •
30-Cold
Programme and consumption table (for drying)
C
INFORMATION
Information for test institutions:
"Washing performance tests for EU energy labelling were done in the "Cottons Eco 60°C" programme
as per the EN 50229 standard.
According to the EN 50229 standard for the EU energy labelling drying performance, the maximum
washing load must be divided into groups as the maximum drying load and the remaining drying
load, and then each load must be dried using the option "Cottons Drying Extra Dry".
5.11 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. When a programme is selected,
lights of the auxiliary functions that can be selected
together with that programme will turn on.
-
-
-
-
C
INFORMATION
• Lights of the auxiliary functions that
cannot be selected together with the
selected programme will not turn on. If
you press the buttons of these auxiliary
functions, you will hear a warning
and selection will be disabled.
If the washing programme has reached a
point where an auxiliary function cannot be
selected, you cannot select any function.
C
INFORMATION
• Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the
function selected first will be canceled
and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible
with the programme cannot be selected.
(See "Programme and consumption table")
• Some programmes have auxiliary
functions that must run together with the
selected programme. These functions
cannot be cancelled. The light of the
relevant auxiliary function is already on.