background image

4.

3

.15 Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another 

programme. Previous programme will be cancelled. End / Cancel light will flash 

continuously to notify that the programme has been canceled. 

Your machine will end the programme when you turn the Programme Selection 

knob; however, it does not drain the water inside. When you select and start a new 

programme, the newly selected programme will start depending on the step the 

previous programme was canceled in. For example, it may take in additional water or 

continue to wash with the water inside.

C

Some programmes may start by discharging the water inside the machine. Depending on the 

step where the programme was canceled in, you may have to put detergent and softener 

again for the programme you have selected anew.

4.

3

.16 End of programme

When the programme ends, "End" LED becomes on at the Programme Follow-up 

indicator. 

1. Wait until the "Door Lock Enabled LED" goes off completely.

2. To switch off the machine, turn the Programme Selection Knob to On/Off position.

3. Take out your laundry and close the loading door. Your machine is ready for the next 

washing cycle.

4.

3.

17 Your machine features "Pause Mode".

After you switch on your machine with the programme selection button (by switching 

the button to a different position than the On/Off position), if no programme is started 

or no other procedure is performed in the selection step or no action is taken within 

approx. 2 minutes after the selected programme ends, your machine will switch to 

energy saving mode automatically. The brightness of the indicator lights will decrease. 

Also, if your product has a display that shows programme time, this display will be 

completely turned off. If you turn the Programme Selection knob or touch any button, 

lights and display will switch back to previous condition. The selections which you make 

when exiting from the energy efficiency may change. Please check the correctness of 

your selections before starting the programme. If necessary, please make your settings 

again. This is not an error.

Washing Machine / User’s Manual

21

 / EN

Summary of Contents for WCV6511BW





























Reviews: