Beko VRT 7524, User Manual, Page: 9 / 16

Cordless Stick Vacuum Cleaner / User Manual
9 / 14 EN
3.8 Disassembling of parts
3.8.1 Disassembling of metal
tube
Press the metal tube release button, tube, and
remove the metal tube.
3.8.2 Disassembling of floor
brush
Press the floor brush release button, and remove
it.
3.8.3 Disassembling of dust cup
Press dust cup release button rotate dust cup
component as shown in the picture. Remove the
dust cup component after the upper part leaved
the main body.
3.8.4 Disassembling of battery
pack
Press the battery pack release button, and remove
it as shown in the picture below.
A
This battery pack is only applicable
for this machine and forbidden
for other purposes. It can only
be charged by its own adapted
charging dock. This battery pack
shall not be disassembled or in
touch with liquid to avoid damage or
short circuit. Keep the battery pack
away from hot articles or open fire.
Do not use sharp objects to stick
into the battery pack.
A
Children are not allowed to use or
play with this battery pack.
3.9 Operation mode
3.9.1 Operation mode of whole
machine
The circular inching switch is adopted for the
whole machine. Press continuously the switch
button can realize the circular switchover of
three statuses of start-up default standard mode,
strengthened operation mode.
Start-up: Press down the switch button, the
whole machine starts and is defaulted in
standard operation mode, which is applicable for
conventional floor vacuuming.
Speed regulation of whole machine: After the
default standard mode of start-up, press the
switch button again. The whole machine will be
switched over to the strengthened operation
mode and provide stronger suction force, which
is applicable for vacuuming floor types which are
difficult to clean, such as the carpet and those
with gaps.
3 Part disassembling