EN
7
Indicator panel(External display)*Optional
Indicator panel allows you to set the temperature and control the other functions related to the product without
opening the door of the product. Just press the inscriptions on relevant buttons for function settings.
Figures that take place in this instruction manual are
schematic and may not correspond exactly with your
product. If the subject parts are not included in the
product you have purchased, then it is valid for other
1. Power failure/High temperature / error warning
indicator
This indicator ( ) illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature that
the freezer compartment reaches will flash on the digital
display. After checking the food located in the freezer
compartment ( ) press the alarm off button to clear the
warning. Please refer to "remedies advised for trouble-
shooting" section on your manual if you observe that
this indicator is illuminated.
models.
2. Energy saving function (display off):
If the product doors are kept closed for a long time
energy saving function is automatically activated and
energy saving symbol is illuminated. ( )When energy
saving.function is activated, all symbols on the display
other than energy saving symbol will turn off. When the
Energy Saving function is activated, if any button is
pressed or the door is opened, energy saving function
will be canceled and the symbols on display will return
to normal.
Energy saving function is activated during delivery from
factory and cannot be canceled.
3.Quick fridge function
The button has two functions. To activate or
deactivate the quick cool function press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings. ( )
Use quick cooling function when you
want to quickly cool compartment. If
you want to the food placed in the
fridge cool large amounts of fresh
Food,activate this function before
putting the food into the product.
If you do not canel it,quick cooling will
cancel itself automatically after 1 hours
or when the fridge compartment
reaches to the required temperature.
If you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
This function is not recalled when
power restores after a power failure.
4. Fridge compartment temperature setting button
Press this button to set the temperature of the
fridge compartment to 8, 7,6, 5,4,3, 2, 8...
respectively. Press this button to set the fridge
compartment temperature to the desired
value. ( )
5.Vacation Function
In order to activate vacation function,press the
this button ( ) for 3 seconds, and the vacation
mode indicator ( ) will be activated. When the
the vacation function is activated, “- -” is displayed
on the fridge compartment temperature indicator
and no active cooling is performed on the fridge
compartment. It is not suitable to keep the food in
the fridge compartment when this function is
activated. Other compartments shall be continued
to be cooled as per their set temperature.To cancel
this function press Vacation function button again.
6. Alarm off warning:
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button ( )
to clear the warning.
7.Key lock
Press key lock button ( )simultaneously for
3 seconds. Key lock symbol ( )will light up and
8. Eco fuzzy
Press and hold eco fuzzy button for 1 seconds to
activate eco fuzzy function. Refrigerator will start
operating in the most economic mode at least
6 hours later and the economic usage indicator will
turn on when the function is active ( ).Press and
hold eco fuzzy function button for 3 seconds to
deactivate eco fuzzy function.This indicator is
illuminated after 6 hours when eco fuzzy is activated.
key lock mode will be activated. Buttons will not
function if the Key lock mode is active. Press key
lock button simultaneously for 3 seconds again.
Key lock symbol will turn off and the key lock mode
will be exited.
Press the Key lock button if you want
to prevent
changing of the temperature setting of the
refrigerator ( )
