Beko VCO32818WR, User Manual

Page: 11 / 56

Vacuum Cleaner / User Manual
11 / EN
4.2.1 Motor protection filter and
HEPA filter
These filters are located on the rear side of the
dust container (4).
1. Press the dust container removal button (8) and
remove the dust container (4).
2. Remove the HEPA filter and motor protection
filter found at the back of the dust container (4).
3. After washing the sponge protection filter
under running water, wring it out slightly and
leave it to dry (for 24 hours minimum).
4. Shake off the HEPA inlet filter to eliminate
the dusts on it. After that, you can wash it by
holding its clean side under running cool water.
5. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.
4.2.2 Air outlet filter
1. Push down the rear cover opening latch to open
the cover.
2. Remove the micro filter placed on the back of
the lid to rinse it.
3. After rinsing, gently squeeze the micro filter.
4.3 Storage
•
If you do not intend to use the appliance for a
long time, store it carefully.
•
Unplug the appliance.
•
Keep the appliance out of the reach of children.
4.4 Handling and
transportation
•
During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
•
Do not place heavy loads on the appliance or on
the packaging. The appliance may get damaged.
•
Dropping the appliance may render it non-
operational or cause permanent damage.
4 Cleaning and care