Beko RRN 2260, Instruction Manual

Page: 8 / 18

en en
1
Congratulations on your choice of our product which will certainly provide you with many years
of good service.
Safety comes first!
Please read the operating manual carefully. It contains important information on the use of
your device. If instructions are not adhered to, you may lose your right to service at no charge
during the warranty period. Please keep this manual in a safe place and pass it on to later
users if applicable.
• Do not connect your appliance to the electricity supply until all packing and transit protectors
have been removed.
• Leave to stand for at least 4 hours before switching on to allow the system to settle if
transported horizontally.
• This appliance must only be used for its intended purpose, i.e. the storing and freezing of
edible foodstuff.
• We do not recommend use of this appliance in an unheated, cold room e.g. garage,
conservatory, annex, shed, out-house, etc., see ‘Location’.
• On delivery, check to make sure that the product is not damaged and that all the parts and
accessories are in perfect condition.
• Do not operate a damaged device; if in doubt, check with the suppliers.
• Do not allow children to play with the device.
• Do not sit or stand on, or sit or stand children on, the device or the pull-out parts.
• Do not hang on the device door.
• Do not dispose of the appliance on a fire. Your appliance contains non CFC substances in
the insulation which are flammable.
• Please contact your local authority for information on disposal and facilities available.
Warning - Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
Warning - Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Warning - Do not damage the refrigerant circuit.
Warning - Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
• Avoid touching the metallic condenser wiring on the backside of the device; there is risk of
injury.
• In the event of a possible malfunction, disconnect the device from the power mains first.
• Prior to cleaning the device, always unplug the power supply or shut off the fuse. Do not pull
from the cable - pull from the plug.
• Repairs to the electrical equipment may only be made by qualified experts. If the connection
cable is damaged, the manufacturer or customer service must replace it in order to avoid
danger.