• Remove all packing materials from inside the
Drawer Microwave. DO NOT REMOVE THE
WAVEGUIDE COVER, which is located on the
top of the appliance.
Waveguide
Cover
Sealing
Surface
Oven
Cavity
Sealing
Surface
• Remove the feature sticker, if there is one.
Check the drawer for any damage, such as
misaligned or bent drawer, damaged drawer
seals and sealing surfaces, broken or loose
drawer guides and dents inside the cavity or on
the front side of the drawer. If there is any dam-
age, do not operate the appliance and contact
your AUTHORIZED SERVICER.
Important Notes to the
Installer
• Read all of the Installation Manual before in-
stalling the Drawer Microwave.
• Remove all packing material before connecting
the electrical supply.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the
consumer.
Important Notes to the
Consumer
Keep this manual with your Use and Care Manual
for future reference.
• As when using any microwave oven generating
heat, there are certain safety precautions you
should follow. These are listed in the Use and
Care Manual. Read all and follow carefully.
• Be sure your Drawer Microwave Oven is in-
stalled and grounded properly by a qualified
installer or service technician.
Drawer Microwave Oven / Installation Manual
4 / 15 EN
UNPACKING YOUR DRAWER MICROWAVE
2
TINSKB300MRR0_Beko_24" Drawer MWDR24100SS_Install.indd 4
TINSKB300MRR0_Beko_24" Drawer MWDR24100SS_Install.indd 4
8/21/20 11:16 AM
8/21/20 11:16 AM
