Beko L6B PDP TV, Service Manual

Page: 71 / 129

- 18 -
3-3. SCAN IC(Y drv B/D: IC1~8) damage
(1) In case of SCAN IC poor, one horizontal line may open at
screen.
O
Test Point: ICT measurance of GND~Y drive B/D output
O
Wave format: As shown (Fig. 4)
(2) Screen may not shown when SCAN IC is damaged by
SCAN IC poor, external electricity or spark.
O
Test Point: ICT measurance of GND~Y drive B/D output
O
Wave format: Output wave format isn’t output (You can
see the damage for Y drive B/D Top or Bottom’s SCAN
IC)
(3) Screen shaked horizontally when Y drv B/D Top and
Bottom cable is poor
O
Test Point: ICT measurance of GND~Y drive B/D output
O
Wave format: As shown (Fig. 5)
(4) In case of shorting the SCAN IC output by a dust, foreign
substance, it may overlap two horizontal lines on screen.
O
Test Point: ICT measurance of GND~Y drive B/D output
O
Wave format: As shown (Fig. 6)
O
Measurance position: SCAN section enlarge the after
measuring output ICT of Y drive B/D. (Full White
Pattern)
(Fig. 4) When SCAN IC is poor
(Fig. 5) When Y drv B/D Top and Bottom cable is poor
(Fig. 6) When SCAN IC output is short
<SCAN IC Normal Output Wave >