Beko HNU 51310 SD, User Manual, Page: 5 / 20

Hood / User Manual
5 / EN
•
If the instructions for installation
for the gas hob specify a greater
distance, this has to be taken into
account.
•
Make sure that your mains power
supply complies with the informa-
tion supplied on the rating plate
of the appliance.
•
Never use the appliance if the
power cable or the appliance it-
self is damaged.
•
Prevent damage to the power
cable by not squeezing, bending,
or rubbing it on sharp edges. Keep
the power cable away from hot
surfaces and naked flame.
•
Use the appliance with a grounded
outlet only.
WARNING: Do not connect the
appliance to the mains until the
installation is fully complete.
•
Place the appliance in a way so
that the plug is always accessible.
•
Do not touch the lamps if they
have operated for a long time.
They can burn your hands since
they will be hot.
•
Follow the regulations set out
by competent authorities on dis-
charge of the exhaust air (this
warning is not applicable for use
without flue).
•
Operate your appliance after put-
ting a pot, pan etc. on the hob.
Otherwise, high heat may cause
deformation in some parts of your
product.
•
Turn off the hob before taking the
pot, pan etc. from it.
•
Do not leave hot oil on the hob.
Pans with hot oil may cause self
combustion.
•
Pay attention to your curtains
and covers since oil may catch fire
while cooking food such as fries.
•
Grease filter must be replaced
at least monthly. Carbon filter
must be replaced at least every 3
months.
•
Product shall be cleaned accord-
ance with user manual. If cleaning
was not carried out in accordance
with user manual, there may be
fire risk.
•
Do not use non-fire-resistant fil-
tering materials instead of the
current filter.
•
Only use the original parts or
parts recommended by the man-
ufacturer.
•
Do not operate the product with-
out the filter and do not remove
the filters while the product is
running.
1 Important Safety and Environmental Instructions