31 / EN
Washer-Dryer / User’s Manual
5.18.2 To deactivate the child lock:
Press and hold 2nd and 3rd auxiliary
function buttons for 3 seconds.
After
the countdown as "Child Lock 3-2-
1" on the display is over, "Child Lock
Enabled" is turned off on the display.
5.19 Cancelling the programme
1400
800
1000
600
150’
Ütü Kuruluğu
Dolap Kuruluğu
Extra Kurutma
90’
20°
30’
8.5
10.5
Malzeme rengi ARC 716
Colour of material is ARC 716
%DVN×UHQJL3DQWRQH&
3ULQWLQJFRORULV3DQWRQH&
INLAY STOCK NO:
2846559001
1400
800
1000
600
150’
Ütü Kuruluğu
Dolap Kuruluğu
Extra Kurutma
90’
20°
30’
The programme is cancelled when the
machine is turned off and on again. Press
and hold
On / Off
button for 3 seconds.
After the countdown as "3-2-1" on the
display is over, the machine turns off.
C
INFORMATION
• If you press On / Off button when the
Child Lock is active, the programme
will not be cancelled. You should
cancel the child lock first. Countdown
as “3-2-1” appears on the display.
• If you want to open the loading door
after you have cancelled the programme
but it is not possible to open the loading
door since the water level in the machine
is above the loading door baseline,
then turn the Programme Selection
knob to Pump+Spin programme and
drain the water in the machine.
5.20 End of programme
When the programme is over the End
of Programme indicator illuminates
and a buzzer is heard.
If you do not press any button for 2 minutes,
the machine will switch to standby mode.
Display and all indicators are turned off.
If you press any button or turn the
Programme
Selection
knob when the machine is in
standby mode, programme steps that are
completed will appear on the display.
5.21 Your machine features
a "Standby Mode".
After you switch on your machine with On-Off
button, if no programme is started or no other
procedure is performed at the selection step or
no action is taken within approx. 2 minutes after
the selected programme ends, your machine
will switch to energy saving mode automatically.
Also, if your product has a display that shows
programme time, this display will be completely
turned off. If you turn the Programme Selection
knob or touch any button, lights and display
will switch back to previous condition. The
selections which you make when exiting from
the energy efficiency may change. Please
check the correctness of your selections before
starting the programme. If necessary, please
make your settings again. This is not an error.
