Cooker Hood / User Manual
9 / EN
3
Operation of the Appliance
3.5 Operation with Flue
Connection
•
Vapour is extracted through
the flue duct, which is fastened
to the connection head on the
hood.
•
The diameter of the flue
duct must be the same as the connection
ring. In horizontal settings, the pipe has to
have a slight upward slope (around 10º) so
that the air can exit the room easily.
3.6 Operation without Flue
Connection
•
Air is filtered through the
carbon filter and recirculated in
the room. Carbon filter is used
when it is impossible to use a
flue in the house.
•
In flueless use, remove the flaps inside the
flue adapter.
•
Remove the aluminium grease filter. To in-
stall the carbon filter, fit the filter to the tabs
by centring it on the plastic piece on both
sides of the fan body. tighten it by turning
right or left.
•
Replace aluminium grease filter.
Bulb
Bulb Power (W)
3
Holder / Socket
E14
Bulb Voltage (V)
220 - 240
Size (mm)
100 x 35
ILCOS Code
DRBB/F-3-220-
240-E14-35/100
3.4 Replacement of Lamp
Make the electrical connections of the ap-
pliance. Your appliance is equipped with a 3
W spot LED lamp. For replacing the lamps,
push downwards on the holder from its be-
hind, turn it counter-clockwise, and take it out
downwards. Apply the above operation in re-
verse to install new lamps (Figure 3).
(Figure 3)
