Beko HCF61620X, User Manual

Page: 10 / 177

10 / EN Hood / User Manual
3 Using the Appliance
3.1 Use of the Rocker Switch
3.2 Things to Do for Energy
Saving
•
Ensure sufficient air intake to make
the hood operate efficiently and with
low operation noise during cooking.
•
Set the fan level according to the den-
sity of steam in kitchen. Use the high
level only when needed. A lower fan
level means less energy consumption.
•
If dense smoke is expected in the
kitchen, select a higher level of fan
in advance. It is required to operate
the hood much longer to remove the
smoke already spread all over kitchen.
•
Turn off the hood when not in use.
•
Clean or replace the filter at intervals
stated, thus, the efficiency of the ven-
tilation is increased and the risk of fire
is eliminated.
3.3 Operating the Hood
•
Hood is equipped with a motor having
various speed settings.
•
For a better performance, we advise
you to use low speeds in normal con-
ditions, and high speeds when smell
and vapors are intensified.
•
You can start the hood by pressing the
desired speed level key.(a, b, c )
•
You can illuminate the cooking are a by
pressing the light key.(d)
Fig.3
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood
suction is switched on for 5 minutes
prior to cooking and to leave in opera-
tion during cooking and for another 15
minutes approximately after termina-
ting cooking.
a
b
c
d