Cooker Hood / User Manual
9 / EN
3
Operation of the Appliance
3.5 Replacement of Lamp
(Figure 3)
Make the electrical connections of the appli-
ance. Your appliance uses 3W spot LED lamp.
For replacing the lamps, push downwards
on the holder from its behind, turn it coun-
ter-clockwise, and take it out downwards.
Apply the above operation in reverse to install
new lamps (Figure 3).
3.6 Operation with Flue
Connection
•
Vapour is extracted through
the flue duct, which is fastened
to the connection head on the
hood.
•
The diameter of the flue duct must be the
same as the connection ring. In horizontal
settings, the pipe has to have a slight up-
ward slope (around 10º) so that the air can
exit the room easily.
3.7 Operation without Flue
Connection
•
Air is filtered through the
carbon filter and recirculated in
the room. Carbon filter is used
when it is impossible to use a
flue in the house.
•
In flueless use, remove the flaps inside the
flue adapter.
•
Remove the grease filter. To install the car-
bon filter, fit the filter to the tabs by centring
it on the plastic piece on both sides of the
fan body. Tighten it by turning right or left.
•
Replace aluminium grease filter.
Bulb
Bulb Power (W)
3
Holder / Socket
GZ 10
Bulb Voltage (V)
220 - 240
Size (mm)
53 x 50
ILCOS Code
DR/F3-220-240-
GZ10-50-53
