Beko GNE490E20DZXP, User Manual

Page: 10 / 138

Installation
9 /31 EN
Refrigerator / User Manual
3.3. Adjusting the feet
If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
3.4. Electrical connection
A
WARNING:
Do not make connections
via extension cables or multi-plugs.
B
WARNING:
Damaged power cable
must be replaced by the Authorized
Service Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
•
Our company shall not be liable for any damages
that will arise when the product is used
without grounding and electrical connection in
accordance with the national regulations.
•
Power cable plug must be within easy reach after
installation.
•
Do not use extension cords or cordless multiple
outlets between your product and the wall outlet.
C
Warning for hot surfaces!
The side walls of your product are
equipped with coolant pipes to
improve the cooling system. The high
temperature fluid may flow through
these surfaces and may heat the
surfaces on the side walls. This is
normal and does not require service
maintenance. Be careful when touching
these areas.