8 / 37 EN
Refrigerator / User Guide
3
Installation
3.1. Right place for installation
Contact the Authorized Service for the product's
installation. To ready the product for installation, see
the information in the user guide and make sure the
electric and water utilities are as required. If not, call
an electrician and plumber to arrange the utilities as
necessary.
B
8"3/*/(
The manufacturer
assumes no responsibility for any damage
caused by the work carried out by
unauthorized persons.
B
8"3/*/(
The product’s power
cable must be unplugged during
installation. Failure to do so may result in
death or serious injuries!
A
8"3/*/(
: If the door span is too
narrow for the product to pass, remove
the door and turn the product sideways; if
this does not work, contact the authorized
service.
t 1MBDFUIFQSPEVDUPOBGMBUTVSGBDFUPBWPJE
vibration.
t 1MBDFUIFQSPEVDUBUMFBTUDNBXBZGSPNUIF
heater, stove and similar sources of heat and at
least 5 cm away from electric ovens.
t %POPUFYQPTFUIFQSPEVDUUPEJSFDUTVOMJHIUPS
keep in damp environments.
t 5IFQSPEVDUSFRVJSFTBEFRVBUFBJSDJSDVMBUJPOUP
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
distance between the product and the ceiling
and the walls.
t %POPUJOTUBMMUIFQSPEVDUJOFOWJSPONFOUTXJUI
temperatures below -5°C.
3.2. Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.
To attach the wedges, remove the screws on the
product and use the screws provided with the
wedges.
Attach 2 plastic wedges on the ventilation cover
shown as j in the figure.
