Beko FSE1073, User Manual

Page: 6 / 51

EN
5
1
1
•
Do not use steam or steamed clea-
ning materials for cleaning the ref-
rigerator and melting the ice inside.
Steam may contact the electrified
areas and cause short circuit or ele-
ctric shock!
•
Do not wash the product by spraying
or pouring water on it! Danger of
electric shock!
•
In case of malfunction, do not use
the product, as it may cause electric
shock. Contact the authorised servi-
ce before doing anything.
•
Plug the product into an earthed
socket. Earthing must be done by a
qualified electrician.
•
If the product has LED type lighting,
contact the authorised service for
replacing or in case of any problem.
•
Do not touch frozen food with wet
hands! It may adhere to your hands!
•
Do not place liquids in bottles and
cans into the freezer compartment.
They may explode.
•
Place liquids in upright position after
tightly closing the lid.
•
Do not spray flammable substances
near the product, as it may burn or
explode.
•
Do not keep flammable materials
and products with flammable gas
(sprays, etc.) in the refrigerator.
•
Do not place containers holding liqu-
ids on top of the product. Splashing
water on an electrified part may cau-
se electric shock and risk of fire.
•
Exposing the product to rain, snow,
sunlight and wind will cause electri-
cal danger. When relocating the pro-
duct, do not pull by holding the door
handle. The handle may come off.
•
Take care to avoid trapping any part
of your hands or body in any of the
moving parts inside the product.
•
Do not step or lean on the door,
drawers and similar parts of the ref-
rigerator. This will cause the product
to fall down and cause damage to
the parts.
•
Take care not to trap the power
cable.
1.1.1 HC warning
If the product comprises a cooling
system using R600a gas, take care to
avoid damaging the cooling system and
its pipe while using and moving the
product. This gas is flammable. If the
cooling system is damaged, keep the
product away from sources of fire and
ventilate the room immediately.
C
The label on the inner left side
indicates the type of gas used in
the product.