17
To change the programme selection while the
machine is operating:
·
Press start/stop button. The indicator light will
go off.
·
Select the new programme. Press start/stop
button. The indicator light will be on and new
programme will start.
!
The new programme will NOT start right from
the beginning. It will start from the stage last
carried out by the previous programme selection.
Dishes should be allowed to cool for about
15 - 30 minutes after the end of the programme.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes
as soon as the programme finishes.
! Care must be taken when opening the
door, as steam will escape.
First unload the lower, then the upper rack. This
prevents drops of water from falling onto the full
lower basket when the dishes in the upper basket
are being removed.
·
Turn the water tap on. Open the door of the
machine.
·
Check that the upper and lower arms can rotate
freely.
·
Pour (Put in) the detergent.
·
Close the door of the machine.
·
Push in the on/off button and check that the
on/off indicator light comes on.
·
Check the salt and rinse aid level indicator
lights before you start the machine. If necessary
add salt and rinse aid.
·
Select the required programme by referring to
the programme chart. Choose the desired
programme by turning the selector knob.
Then select from available options, if required.
·
The display shows the Total Duration of the
selected programme in minutes.
·
Press start / stop button and check that the
function indicator light comes on.
!
Do not open the dishwasher door whilst the
appliance is in operation. However, in case the
door is opened while the machine is working,
then a safety mechanism ensures the machine
immediately stops. Water may be very hot, so be
careful.
!
Care must be taken if opening the door, as
steam and water will escape.
·
Press the on/off button after the programme
is completed. The indicator light will go off.
·
Turn off the water tap, unload the baskets.
!
Just after the dishwasher has started the
selected programme, if you find that you want to
put in another item to be washed, then switch
the dishwasher off by pressing the On/Off button,
the indicator light will go off, wait for a few
moments and then open the door carefully. Then
after putting in the item, switch it back on again.
The indicator light will come on and the dishwasher
will resume operation.
To cancel a programme while the machine is
operating:
·
Press and hold start/stop button for 5 seconds.
The indicator light will start flashing. The machine
will drain the water inside the machine for 45
seconds.
·
The programme is cancelled when start/stop
indicator light goes off. Then, you can choose and
start a new programme.
!
Depending on the stage of the programme
you have cancelled, there may be detergent residue
or rinse aid inside the machine and on the load.
Make sure the items in the dishwasher are not
used before washing properly.
Summary of Contents for DWD8650X
Page 20: ...Notes 22 ...
