Beko DWD4311, Manual

Page: 21 / 28

20
GB
6
•
Turn the water tap on. Open the
door of the machine.
•
Check that the upper and lower
arms can rotate freely.
•
Pour (Put in) the detergent.
•
Close the door of the machine
•
Push in the on/off button and
check that the programme
indicator lights come on.
•
Check the salt and rinse aid level
indicator lights before you start the
machine. If necessary add salt and
rinse aid.
•
Select the required programme by
referring to the programme chart.
Choose the desired programme by
turning the selector knob
•
Press start / stop button and check
that the start / stop indicator light
comes on.
! Do not open the dishwasher door
whilst the appliance is in operation.
However, in case the door is opened
while the machine is working, then
a safety mechanism ensures the
machine immediately stops. Water may
be very hot, so be careful.
! Care must be taken if opening the
door, as steam and water will escape.
•
Press the on/off button after the
programme is completed. The
indicator lights will go off.
•
Unload the baskets - we
recommend to turn off the water
tap when not in use
! Just after the dishwasher has started
the selected programme, if you find
that you want to put in another item to
be washed, open the door carefully.
Care must be taken if opening the
door, as steam and water will escape.
Then after putting in the item, close
the door. The dishwasher will resume
operation.
Operating the dishwasher
Hot Air Drying
Hot Air Drying ensures your dishes are
dried efficiently.
Unloading dishwasher
Dishes should be allowed to cool for
about 15 - 30 minutes after the end of
the programme.
You will improve drying results by
leaving the dishwasher door ajar for
at least 15-30 minutes as soon as the
programme finishes.
! Care must be taken when opening
the door, as steam will escape.
First unload the lower, then the upper
rack. This prevents drops of water from
falling onto the full lower basket when
the dishes in the upper basket are
being removed.