23
GB
Clean all three filters under running tap
water with a brush.
Reinsert the main filter in its place.
Place the coarse filter into the micro
filter. Ensure the marks align properly.
Turn the coarse filter clockwise until
you hear a clicking sound.
It is important that you fit the filters
correctly.
Caution: the dishwasher must not
be used without filters.
Incorrect repositioning of the filters
will produce poor washing results.
Cleaning of the filters is vital to
ensure correct operation of the
machine.
Upper spray arm
Turn the nut anti clockwise and remove
both the nut and the spray arm.
Flush away food particles under
running water.
Put the spray arm back on and screw
on the nut turning clockwise until a
clicking sound is heard.
Lower spray arm
Remove the spray arm from its slot
by releasing the catches and pulling it
upwards.
Flush away the food particles under
running water.
Reinsert the spray arm back into its
original position.
Top spray arm
Check if the holes on the top of the
additional top spray arm are clogged.
If they are clogged, remove and clean
them.
To remove them, slightly push them
upwards (1) and then turn clockwise
(2)
To replace the impeller, seat it into its
slot, push slightly upwards and turn it
anticlockwise until it is securely fitted.
When the impeller is released, check if
it rotates without any obstruction.
