Beko DVS Series User Manual Download | Manualshive

Page: 38 / 42

background image

38

Dishwasher / User’s Manual

/42 EN

7

Troubleshooting

Machine does not start.

•  Power cable is unplugged. >>> Check if the power cable is plugged in.
•  Fuse is blown. >>> Check the fuses in your house.
•  Water is cut. >>> Make sure that the water inlet tap is open.
•  Door of the machine is open. >>> Make sure that you have closed the door of the

machine.

• On / Off button is not pressed. >>> Make sure that you have turned on the machine by

pressing the On / Off button.

Dishes are not washed clean

• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the

user manual.

• Selected programme is unsuitable. >>> Select a programme with a higher temperature

and cycle time.

• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper

impellers by hand to make sure that they rotate freely.

• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with

food remnants such as lemon pips. Clean the impellers regularly as illustrated in section

“Cleaning and Care”.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system

regularly as illustrated in section “Cleaning and Care”.

• Filters are installed incorrectly. >>> Check the filter system and make sure that it is

installed correctly.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder

detergent, do not store the detergent package in humid places. Keep it in a closed

container if possible. For ease-of-storing, we recommend you to use tablet detergents.

• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount

of detergent according to the soiling degree of your dishes and/or programme

definitions. We recommend you to use tablet detergents for optimum results.

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if

necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the

machine.

• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is

closed tightly after adding detergent.

Dishes are not dry at the end of cycle

• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no

water will accumulate in them.

«
...
36
37
38
39
40
...
»

Summary of Contents for DVS Series











































Reviews:

No comments

Related manuals for DVS Series

CleanDesign GSD400T

Brand: GE Pages: 13

Brand: GE Pages: 2

Brand: GE Pages: 2

Brand: Dacor Pages: 16

Brand: Smeg Pages: 10

Brand: SCHOLTES Pages: 52

Brand: Majestic Appliances Pages: 29

Brand: GE Pages: 28

Brand: Scandium Pages: 40

Brand: Indesit Pages: 16

Brand: GE Pages: 52

Brand: Pelgrim Pages: 32

Brand: V-ZUG Pages: 44

Brand: Blomberg Pages: 44

Brand: Fisher & Paykel Pages: 76

Brand: Smeg Pages: 14

Brand: Crystal Pages: 38

Brand: Hallman Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands