Beko DVD 2008, User Manual

Page: 22 / 27

20
Function Setup
Press the SETUP button, the following graphic will display on
the screen.
1.Press the SETUP menu to enter the setup menu.
2.Use the / button to choose the menu item you want to
change, then press ENTER to confirm it.
3.Use the button to move the high light icon to the right side
item.
4.Use the up/down button to change the current setup, then press
the ENTER button to confirm it.
5.Use the button to move the high light icon to the left side item.
6.Select the EXIT SETUP item or press the SETUP button to quit
the setup menu.
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
TV SYSTEM >>
NTSC
PAL
AUTO
ON
OFF
INTERLACE - YUV
TV-RGB
P-SCAN YPBPR
S-VIDEO
4:3 PS
4:3 LB
16:9
NO ADULT
KID SAFE
VIEW ALL
RESTORE
TV TYPE >>
EXIT SETUP
SCREEN SAVER >>
VIDEO >>
PASSWORD >> －－－－－
RATING >>
DEFAULT >>
TV SYSTEM
the TV output mode can be : NTSC , PAL or AUTO . Set
up the system of your DVD player to match the system of your
TV .
SCREEN SAVER
When in ON mode , if you do not make any operation or are in
stop mode for 3 minutes , the screen saver picture will appear.
VIDEO
Video setup has four options . If using INTERLACE-
YUV output to TV , choose INTERLACE-YUV
mode. If using P-SCAN YPBPR output to TV ,
choose P-SCANYPBPR mode
TV TYPE
16:9-To view broad mode picture with the broad
screen TV set
4:3(LB)-To view the standard 4:3 picture or the cut
standard 4:3 picture.
4:3(PS)- 4:3 subtitle block to view the full width of
the broad mode
PASSWORD
The default mode is set at LOCK , you cannot change
the RATING , and cannot change the password in this
state. Factory setup(password 0000)
If you want to change the RATING grade or the
password, please input the initial password 0000 to
unlock , and press the ENTER button first . Thereafter
input your new password and enter the ENTER button.
If later on you want to make a new setting for the
RATING. And you want to change the password ,
please input the new password as set above . If you
input 0000,it will also work.
Important:
Please remember to write down the new password and
keep it in a safe place(Ex.behind the remote control
battery cover).
The parent lock function will only work on DVD
discs with parental control marks
RATING
There are three grade ratings . The performance of this
function will depend on the discs
DEFAULT
The default is to change your setup state to the
factory default setup