
24 / EN
Dryer / User Manual
Adding/removing laundry in standby
mode
In order to add or remove laundry after the
programme starts:
1. Press the “Start/Pause/Cancel” button to
switch the dryer to “Pause” mode. Drying
process will stop.
2. Open the door at “Pause” position and
close it again after adding or taking out
laundry.
3. Press “Start/Pause/Cancel” button to
start the programme.
C
Any laundry added after the
drying process has started may
cause the dried clothes in the
machine intermingle with wet
clothes and the result will be wet
laundry after the drying process
is over.
C
Laundry may be added or taken
out as much as desired during a
drying process, but this process
will extend the programme
duration and increase energy
consumption since the drying
will be interrupted continuously.
Therefore, it is recommended to
add laundry before the drying
programme has started.
6.12 Child-proof lock
There is a child-proof lock to prevent any
programme interruption due to the pressing
of button while the programme is running.
The loading door and all buttons except the
“On/Off” button on the control panel are
deactivated when the child-proof lock is
active.
Press the “Start/Pause/Cancel” and “Cancel
audio warning” buttons simultaneously for 3
seconds to activate the child-press lock.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for 3
sec. again to deactivate the child-proof lock.
C
Child-proof lock is deactivated
when the machine is restarted
by pressing the On/Off button.
C
Press the relevant buttons for
3 seconds to activate the child-
proof lock. A long beep will be
heard and the child-proof lock will
be activated. A double beep will
be heard if you press any button
or turn the programme selection
knob while the child-proof lock
is active. Press the buttons for 3
seconds to deactivate the child-
proof lock. Single beep will be
heard and child-proof lock will be
deactivated.
A
A double beep will be heard if you
turn the programme selection
knob when the machine is
running and the child-proof lock is
active. If you deactivate the child-
proof lock without returning the
programme selection knob to its
previous position, the programme
will be terminated since the
position of the programme
selection knob is changed. The
drying light turns on and the
machine remains on hold until a
new programme is selected and
the “Start/Pause/Cancel” button
is pressed.
Summary of Contents for DSV64W
Page 1: ...Dryer User Manual EN 2960310633_EN 210916 1056 DSV64W ...
Page 31: ......