Beko DSN28520X User Manual Download

Page: 44 / 44

Dishwasher / User’s Manual

/44 EN

Troubleshooting

A smear remains on glasses that resembles milk stain which can not be

removed when wiped by hand. A bluish / rainbow appearance occurs when

the glass is pointed to light.

• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when

adding rinse aid.

• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the

supply water appropriately and check the water hardness setting. If your supply water

is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures

(e.g. 60-65°C). You can also use glass protective detergents that are commercially

available.

Foam forms in the machine.

• Dishes are washed with hand-wash detergent by hand but not rinsed before placing

them into the machine. >>> Hand-wash detergents do not contain antifoam. There is

no need to hand-wash the dishes before placing them into the machine. Removing the

coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.

• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse

aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with

the help of a tissue paper/towel.

• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid

reservoir is closed after adding rinse aid.

Kitchen utensils are broken.

• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the

user manual.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.

Water remains in the dishwasher at the end of the programme.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system

regularly as illustrated in section “Cleaning and Care”.

• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary,

remove the discharge hose, clear the blockage and insert is as illustrated in the user

manual.

If you cannot eliminate the problem although you follow the instructions in this

section, consult your dealer or the Authorised Service Agent. Never try to repair

a nonfunctional product yourself.

Summary of Contents for DSN28520X













































Search results

Summary of Contents for DSN28520X

Reviews:

Related manuals for DSN28520X

Brands by name

Popular brands

Beko DSN28520X, User Manual

Search results

Summary of Contents for DSN28520X

Reviews:

Related manuals for DSN28520X

Brands by name

Popular brands