Beko DSFN-6837, Instruction Manual

Page: 33 / 45

30
EN
started in order to be able to set the
delay time.
Delayed start indicator sand glass
will start flashing when the delayed
start button is pressed. You can set the
desired time by pressing the delayed
start button. Press the Start / Pause /
Cancel button after setting the time. The
delayed start indicator sand glass and
play icon will remain lit on the display
during the delayed start countdown
and the delay time indicator will display
the remaining time. Program will start
automatically when the countdown is
over.
You can use the delayed start function if
you are utilizing the economic electricity
tariff.
If you want to change the program or
functions while the delayed start function
is enabled, then pause the machine
by pressing the Start / Pause / Cancel
button. You will see that the countdown
stops. The delayed start indicator will
start flashing. Select the new program
and/or add the functions as described
in
Program Selection and Table
of Average Consumption Values .
Resume the delayed start countdown
by pressing the Start / Pause / Cancel
button.
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button for three seconds. Release the
button when
symbols start flashing
in the display. For a couple of minutes
the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator displays “0:00”.
You may select and operate a new
program following the delayed start
countdown cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button. Set the desired
time by pressing the Delayed Start
Button. Start the countdown for the
new time by pressing the Start / Pause
/ Cancel button again.
Rinse Aid Indicator
Check the rinse aid warning display
on the screen to find out if there is
sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.
Rinse Aid Indicator Setting
•
When your machine is switched
off, press Half Load
button and
then On / Off button to switch it on.
•
Hold Half Load button pressed
and release On / Off button.
•
Keep Half Load button pressed
for three seconds more.
•
Rinse Aid Indicator comes on
and the stored rinse aid indicator
status of your machine appears on
the display in the format of “ON” or
“OFF”.
•
You can change the status of the
indicator as “ON” or “OFF” with
Start / Pause / Cancel button. If
you switch off the machine with