Beko DRZ1025B, User Manual

Page: 63 / 68

63 / EN
Dryer / User Manual
7 Troubleshooting
Drying operation takes too long.
Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the fibre filters with
warm water and dry.
Evaporator front side may be clogged. >>> Clean the front side of the evaporator.
The ventilation grills in front of the machine may be closed. >>> Remove any object in front
of the ventilation grills that blocks air.
Ventilation may be inadequate because the are the machine is installed in is too small. >>>
Open the door or windows to prevent the room temperature from rising very high.
A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity sensor.
Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
Laundry might not have been wrung adequately. >>> Perform a higher speed wringing on
the washing machine.
Clothes come out damp after drying.
C
Laundry that comes out at the end of the drying process feels more humid than it
actually is.
A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type or
use time programs as extra.
Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the filters with
warm water and dry.
Evaporator front side may be clogged. >>> Clean the front side of the evaporator.
Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
Laundry might not have been wrung adequately. >>> Perform a higher speed wringing on
the washing machine.
Drying machine does not turn on or program cannot be started. Drying machine does not
run after it is configured.
Power plug might be unplugged. >>> Make sure the power cord is plugged in.
Loading door might be open. >>> Ensure that the loading door is properly closed.
A program might not be set or Start / Pause /Cancel button might not be pressed. >>>
Check that the program is set and it is not in Pause position..
Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
Loading door might be closed completely. >>> Ensure that the loading door is properly
closed.
There might be a power outage. >>> Press the Start / Pause / Cancel button to start the
program.
Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.
Water drips from the loading door.
Fibres might have gathered on the inner sides of the loading door and the loading door
gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket
surfaces.