Beko DPH 8744 W, User Manual, Page: 18 / 32

18
Dryer / User Manual
Adding and removing clothes during
stand-by
• If you want to add or remove clothes
to/from the machine after the drying
program starts:
• Press the Start/Stand-by button to put
the machine in Stand-by state. The drying
operation stops.
• Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
• Press the Start/Stand-by button to start
the program.
C
NOTE
• Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
• Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
• If a new program is selected by turning
the program selection knob while the
machine is in stand-by; the running
program terminates and new program
information is displayed on the screen.
WARNING!
• Do not touch the inner surface of the
drum while adding or removing clothes
during a continuing program. The drum
surface is hot.
5.13 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any reason
after the machine starts running, keep the On/
Off/Cancel button pressed for 3 seconds.
A
WARNING!
• The inside of the machine shall be
extremely hot when you cancel the
program during machine operation, so
run the ventilation program to allow it to
cool down.
5.14 End of programme
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols
on the program observation indicator turn on.
Loading door may be opened and machine
becomes ready for another run.
To turn off the machine, press the On/Off/
Cancel button.
C
NOTE
• Wrinkle Prevention function activates
the 2 hour-Wrinkle Prevention program if
laundry isn’t taken out of machine after
completion of the program.
• Clean the fibre filter after each drying.
See 6.1 Loading Door Inner Surface
• Empty the water tank after each drying.
See 6.3 Draining the water tank