background image

EN

20

7

  Recommended solutions for the problems

Please review this list before calling the service. It might save you time and 
money. This list includes frequent complaints that are not arising from defective 
workmanship or material usage. Some of the features described here may not 
exist in your product

.

The refrigerator does not operate
•  Is the refrigerator properly plugged in? Insert the plug to the wall socket.
•  Is power available to the wall socket? If not, please check main power switch 

board circuit breaker/fuse. Please reset circuit breaker and if trips again please 
contact a qualified electrician.

Condensation on the side wall of the fridge compartment. (MULTI ZONE, COOL 

CONTROL ve FLEXI ZONE)

•  Very cold ambient conditions. Frequent opening and closing of the door. Highly 

humid ambient conditions. Storage of food containing liquid in open containers. 
Leaving the door ajar.

•  Switching the thermostat to a colder degree. 
•  Decreasing the time the door left open or using it less frequently.
•  Covering the food stored in open containers with a suitable material.
•  Wipe the condensation using a dry cloth and check if it persists.

Compressor is not running
•  Safety device for compressor may trip during sudden or interrupted power supply. 

It may also trip when the refrigerator has been moved.

•  Your refrigerator will start running after approximately 10 minutes. Please call the 

service agent if your refrigerator does not startup at the end of this period.

•  The fridge is in defrost cycle. This is normal for a full-automatically defrosting 

refrigerator. Defrosting cycle occurs periodically.

•  Your refrigerator is not plugged into the socket. Make sure that he plug is inserted 

tightly to the wall socket.

•  Are the temperature adjustments correctly made? There is a power failure. Call 

your electricity supplier.

The fridge is running frequently or for a long time.

Summary of Contents for DNE 25020

























Reviews: