14
Dishwasher / User’s Manual
/50 EN
PreparatIon
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in the
shortest program.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
A
Only use the detergents
produced particularly for
use with dishwashers in the
machine. We recommend you
not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
C
Even though your machine is
equipped with Automatic Water
Hardness Detection System,
water hardness setting is done
by the authorised service agent/
user during the first setup.
When moving, your dishwasher
will set the water hardness
automatically, depending on
the water hardness level of the
place you have moved to.
C
Adjust the water softness
level according to the "Water
hardness level instruction"
supplied with your machine.
Adding salt
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in
water, stir it with a spoon.
