Beko DIN59420D User Manual Download

Page: 54 / 55

Dishwasher / User’s Manual

/53 EN

Guarantee

Recording of these details alone will not count as proof of purchase. A valid proof of purchase

is required for requesting service under guarantee.

Model number

Serial number

Purchased from Date of purchase

For service under guarantee or for product advice please call our

Contact centre

Before requesting service please check the troubleshooting guide in the Operating

Instructions booklet, as a charge may be levied where no fault is found, and even though

your product may still be under guarantee.

After arranging service the area around the product must be easily accessible to the

Engineer, without the need for cabinets or furniture to be removed or moved.

It is your responsibility to ensure our Engineers have a clean and safe environment to carry

out any repairs.

Please have your Model number and Serial number available when you call us, as you may

be required to input your serial number into your telephone keypad during your call.

UK Mainland & Northern Ireland:

0333 207 9710

Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01

or 02, and are charged at the basic rate. Calls from landlines and mobiles are included in free

call packages but please check with your telephone service provider for exact call charges.

Republic of Ireland:

01 862 3411

Service once the manufacturers guarantee has expired

If you have purchased an extended guarantee please refer to the instructions contained

within the extended guarantee agreement document, otherwise please call us using the

appropriate number above, where service can be obtained at a charge.

Should you experience any difficulty in obtaining service please call us on 0333 207 9710 or

01 862 3411

Contact us though our website

Send us a secure message through our online contact us form. Please visit our website,

click Contact Us and choose a product support topic from the list of options. Complete the

required details and click send message.

Product registrations

For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.

ie/register.

Summary of Contents for DIN59420D
























































Search results

Summary of Contents for DIN59420D

Reviews:

Related manuals for DIN59420D

Brands by name

Popular brands

Beko DIN59420D, User Manual

Search results

Summary of Contents for DIN59420D

Reviews:

Related manuals for DIN59420D

Brands by name

Popular brands