Beko DIN36422 User Manual Download Page 35

Page: 35 / 45

Dishwasher / User’s Manual

33 / 43 EN

OperatIng the product

Cancelling the programme

Press and hold the Programme Selection

/ Programme Cancel keys for 3 seconds.

Release the key as the Start indicator starts

flashing.

Once you close the door of your machine,

draining is completed in 2 minutes

and the machine gives an audible warning

when it is completed.

There might be residues of

detergent or rinse aid left in the

machine and/or on the pieces

being washed depending on the

step in which the programme

has been cancelled.

Salt Indicator ( )

Please check the salt indicator on the display

to see whether there is adequate amount

of softening salt in the dishwasher or not.

You need to refill the salt reservoir with

salt whenever salt indicator appears on the

display of your machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

Rinse Aid Indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid indicator

appears on the display of your machine.

Adjusting the amount of

rinse aid

1. After turning on your machine, press

and hold the Time Delay and Start /

Pause / Cancel keys respectively.

2. Using the Time Delay key, turn on the 6

LED.

3. You can use the function keys to adjust

the rinse aid level.

If the 1st programme indicator is on, no rinse

aid will be dispensed

If the 2nd programme indicator is on, 1 dose

of rinse aid will be dispensed.

If the 3rd programme indicator is on, 2 doses

of rinse aid will be dispensed.

If the 4th programme indicator is on, 3

doses of rinse aid will be dispensed.

If the 1st, 2nd, 3rd and 4th programme

indicators are on, 4 doses of rinse aid will be

dispensed.

4. Press the On/Off key to exit the settings

menu. Your setting will be saved

automatically.

End of programme

When the programme you have

selected comes to an end, an

audible warning signal will warn

you to turn off your machine.

This audible signal will warn you

with certain intervals before it

turns off.

Start / Pause indicator will go off once the

washing programme has ended.

1. Open the door of the machine.
2. Press the On/Off key to switch off your

machine.

3. Close the tap.
4. Unplug the machine from the socket.

Summary of Contents for DIN36422














































Search results

Summary of Contents for DIN36422

Reviews:

Related manuals for DIN36422

Brands by name

Popular brands

Beko DIN36422, User Manual

Search results

Summary of Contents for DIN36422

Reviews:

Related manuals for DIN36422

Brands by name

Popular brands