Dishwasher / User’s Manual
13 / 43 EN
Preparation
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. After turning on your machine, press and hold the Time Delay and Start / Pause / Cancel keys
respectively.
2. Using the Time Delay key, turn on 9 and 3 LEDs.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness Level English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
Press the 1st programme key to set the water
hardness setting to position 1.
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
Press the 2nd programme key to set the water
hardness setting to position 2.
Level 3
16-19
13-15
23-27
Press the 3rd programme key to set the water
hardness setting to position 3.
Level 4
20-24
16-19
28-34
Press the 4th programme key to set the water
hardness setting to position 4.
Level 5
25-62
20-50
35-90
Press the 5th programme key to set the water
hardness setting to position 5.
In order to protect your glassware against glass corrosion in an optimal way, you have to perform
the same hardness settings, which you have made in the control panel, with the regeneration
setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level
4th Level 5th Level
1
1
2
3
4
5
