Beko DIN24215 User Manual Download Page 37

Page: 37 / 46

Dishwasher / User’s Manual

35 / 44 EN

Operating the product

3. Set to the appropriate level with the

Time Delay key.

4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

Leave your dishes in the

machine for about 15 minutes

to allow them cool down after

they are washed. Your dishes

will dry in a shorter time if you

leave the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water

in and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety

is assured, E:01 icon will disappear. If E:01

does not disappear, there is a permanent

fault. In this case the authorised service

should be contacted.

End of programme

When the programme you have

selected comes to an end, an

audible warning signal will warn

you to turn off your machine.

This audible signal will warn you

with certain intervals before it

turns off.

End of Programme indicator will light up

when the washing programme is over.

1. Open the door of the machine.
2. Press On/Off key to turn off your

machine.

3. Close the tap.
4. Unplug the machine from the socket.

For energy saving, the machine

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Summary of Contents for DIN24215















































Search results

Summary of Contents for DIN24215

Reviews:

Related manuals for DIN24215

Brands by name

Popular brands

Beko DIN24215, User Manual

Search results

Summary of Contents for DIN24215

Reviews:

Related manuals for DIN24215

Brands by name

Popular brands