Beko DIN-5834, User Manual

Page: 29 / 42

28
EN
YM_program_
takibi
the estimated time to the end of the
programme. Start / Pause indicator
starts lighting continuously.
C
Your machine performs water
softening depending on the hardness
level of the supply water. Remaining
time displayed towards the end in
some programmes can be different
from the time indicated at the
beginning due to this process. The
total time can also change while the
programme is running depending on
the ambient temperature where your
machine is installed, temperature of
the supply water and amount of the
dishes.
C
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door
of the machine. There may be a rush
of vapour when you open the door
of your machine; be careful. Close
the door of your machine and press
Start / Pause / Cancel key again.
Programme will resume running.
Child Lock
You can prevent other people
from interrupting and changing the
programme cycle and delay time while
the machine is running.
1. Press and hold the Programme
Selection key and the Half Load key
simultaneously for three seconds to
activate the child lock. Child Lock
indicator will appear on the display.
Repeat the same procedure to
disable the Child Lock.
C
Child lock prevents the selected
programme or functions from being
changed and disables the Start /
Pause / Cancel key.
C
Child Lock does not lock the door
of the machine.
Programme follow-up
You can follow-up the washing step
in which the current programme is in
from the Programme Steps Follow-up
indicators on the display.
a Washing Step indicator
b Rinsing Step indicator
c Drying Step indicator
d End of Programme indicator
Indicators for Washing, Rinsing and
Drying will light respectively on the
display while the selected programme
is running. Only the End of Programme
indicator lights up when the
programme is over. “00:00” appears on
Remaining Time indicator.
Canceling a programme
1. Press and hold Start / Pause /
Cancel key for 3 seconds while the
programme is running.
2. Release the key when the Start /
Pause indicator starts flashing.
For a couple of minutes the
machine will fulfill the necessary
operations required to cancel the
programme. Once the Time Delay
function is cancelled, “00:00” will
appear on the Remaining Time
indicator.
C
You can select and operate a
� � � �
��