Beko DIN 1400 XN Manual Download

Page: 28 / 30

1043

1038

Detergent Remains In The Detergent

Dispenser

Damp detergent compartment

Make sure that the detergent dispenser is well dried prior to filling it with

detergent.

Putting detergent in the detergent dispenser long before washing

Take care that detergent is put shortly before startup of washing.

Preventing opening of detergent dispenser lid during washing

Ensure that the lid of detergent dispenser is not opened during loading the

dishes so that entering of water from the impellers into it is prevented.

Detergent kept under unsuitable conditions

If you are using powder detergents, do not store them in humid places after

you open their boxes. Keep them in a closed container, if possible. For ease-

of-storing, we recommend you to use tablet detergents.

Clogged impeller holes

Take out and clean the impellers from time to time as shown in the figure.

Water Remained In The Dishwashing

Compartment After Washing

Clogged filters

From time to time, remove the complete filter system as shown in the manual

and wash it under flowing water.

Blocking / twisting of drainage hose

Connect the drainage hose as described in the manual.

Odour

Odor of new dishwasher

A new dishwasher has a peculiar odor. It will fade out after a couple of

washing.

Clogged filters

From time to time, remove the complete filter system as shown in the manual

and wash it under flowing water.

Leaving the dishes in the dishwasher for a long time

If you are not going to run your dishwasher immediately, load the dishes into

Summary of Contents for DIN 1400 XN































Search results

Summary of Contents for DIN 1400 XN

Reviews:

Related manuals for DIN 1400 XN

Brands by name

Popular brands

Beko DIN 1400 XN, Manual

Search results

Summary of Contents for DIN 1400 XN

Reviews:

Related manuals for DIN 1400 XN

Brands by name

Popular brands