background image

7

Dryer / User Manual

A

WARNING! 

• The duration of the program can 

be extended in order to provide the 

highest level of disinfection to the 

laundry at low ambient temperature.

• Do not remove the UV-C lamp 

protection glass. Do not operate 

the product without the UV-C lamp 

protection glass! 

• After the stops due to various 

reasons (power outage, fuse 

problem, machine door opening, 

etc.) while UV Hygiene Programs 

are in progress, the program will 

resume to disinfection from where 

it left. 

• In cases where UV-C lamp and 

related parts need to be replaced 

(expiration of lamp life, break of 

lamp glass, etc.), call the technical 

service. Do not try to replace the 

parts by yourself. When waiting for 

technical service, make sure the 

machine cover is closed and the 

plug is disconnected! 

• Keep children away while using any 

programs that the UV-C Lamp is 

turned on!

• It can cause allergies, don’t breathe 

directly!

• Always read the product guide 

before using the device and use 

the product according to the 

instructions!

C

NOTE 

• The placement of the UV Lamp and 

lamp protector glass in your product 

is visually indicated 

1.2 Mounting over a washing machine

•  A fixing device should be used between 

the two machines when installing the 

dryer above a washing machine. The 

fitting device must be installed by the 

authorized service agent.

•  Total weight of the washing machine 

and the dryer -with full load- when 

they are placed on top of each other 

reaches to approx. 180 kilograms. Place 

the products on a solid floor that has 

sufficient load carrying capacity!

A

WARNING! 

•  Washing machine cannot be placed on 

the dryer. Pay attention to the above 

warnings during the installation on your 

washing machine.

Installation Table for Washing Machine and Dryer

Dryer 

Depth

Washing Machine Depth

62

 cm

60

 cm

  

54

 cm

 

< 50

 cm

  

54 cm 

Can be installed

Cannot be 

installed

60 cm 

Can be 

installed

Cannot be installed

Summary of Contents for DHY 9P56 VW

































Reviews: