Dishwasher / User’s Manual
21 / 34
EN
Operating the product
5
1
2 3 4
5
6
7
On/Off
Machine will be switched on when you
move the Programme Selection key to
position “1”. “ON” light will illuminate.
Machine will be switched off when you
move it to ”OFF” position. All lights will turn
off.
Programme selection Key
Used to switch on/off the machine and
select the washing programmes.
Half Load key
Select Half Load when using any wash
programme [Except Prewash] to save on
water, electricity and time if the machine
is only half full. You can place dishes
anywhere in the machine; some upper and
some lower basket.
Start / Stop key
It is used to start, pause or cancel the
selected programme.
When you press the Start / Stop key, the
washing programme you have selected will
start.
A
To press the Start / Stop key,
wait for two seconds after you
turn on the machine by pressing
the On / Off key.
Starting your machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance with the
instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put sufficient amount of detergent in
the detergent dispenser and close its
lid.
7. Check if the Salt and Rinse Aid
indicators light and add salt and / or
rinse aid if needed and close the door
of the machine.
9. Select the most suitable programme
by using the table of “Programme Data
and Average Consumption Values”.
10. Select the desired programme with
Programme Selection key.
11. Start the programme by pressing Start
/ Stop key.
1. Programme Starting Point
2. Rinse Aid indicator
3. Salt indicator
4. On/Off Indicator Light & Progress
Indicator Lights
5. Start / Stop key
6. Half Load key
7. On/Off/Programme Selection Key
