Beko DFN26422X User Manual Download

Page: 37 / 46

Dishwasher / User’s Manual

35 / 44 EN

Operating the product

InnerClean

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in

high temperatures, it is harmful

for the dishes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety

is assured, E:01 icon will disappear. If E:01

does not disappear, there is a permanent

fault. In this case the authorised service

should be contacted.

No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4
position.

End of programme

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off

your machine.

2. Close the tap.
3. Unplug the machine from the socket.

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Leave your dishes in the

machine for about 15 minutes

to cool down after they are

washed. Your dishes will dry

in a shorter time if you leave

the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water

in and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

Summary of Contents for DFN26422X















































Search results

Summary of Contents for DFN26422X

Reviews:

Related manuals for DFN26422X

Brands by name

Popular brands

Beko DFN26422X, User Manual

Search results

Summary of Contents for DFN26422X

Reviews:

Related manuals for DFN26422X

Brands by name

Popular brands