background image

14

Dishwasher / User’s Manual

/47 EN

PreparatIon

3.   Add 1 litre of water to salt reservoir of 

your machine only in initial use.

4.  Add salt to the salt compartment. To 

speed up dissolution rate of salt in 

water, stir it with a spoon. 

C

You can put about 2 kg of 

softening salt into the salt 

reservoir.

5.  Replace the lid and tighten it when the 

reservoir is full.

C

You need to add salt right before 

starting the machine. Thus, the 

overflowing salty water will be 

flushed immediately, preventing 

the risk of corrosion in machine. 

In cases where you would not 

start washing immediately, 

run your machine empty in the 

shortest program.

C

Since different salt brands in the 

market have different particle 

sizes and since the water 

hardness may vary, dissolution 

of the salt in water may take 

a couple of hours. Therefore, 

Salt Indicator remains on for a 

while after adding salt into the 

machine.

If the hardness level of the supply water 

is above 90 °dF or if you are using well 

water, then it is recommended to use water 

purification devices and special filters.

If the hardness level of the supply water is 

below 13°dF, there is no need to use salt 

in your dishwasher. If this is the case, “No 

Salt Warning Indicator” (if any) illuminates 

continuously on the panel of your machine.

If the water hardness level adjustment is 

set to level 1, the “No salt warning indicator” 

will illuminate continuously although it 

is not necessary to use salt. If you use 

salt under this condition, salt will not be 

consumed and the Salt indicator will not 

illuminate.

C

If you move your house, it is 

necessary to readjust water 

hardness level of your machine 

by considering the information 

given above according to the 

hardness level of the supply 

water in your new location. 

Your machine will display the 

most recently adjusted water 

hardness level.

C

Adjust the water softness 

level according to the "Water 

hardness level instruction" 

supplied with your machine.

Adding salt

C

Use only special softening salts 

produced particularly for the 

dishwashers in your machine.

1.  First take the lower basket out to add 

softening salt.

2.  Turn the salt reservoir lid counter-

clockwise to open it (A).

Summary of Contents for DEN38530XAD


















































Reviews: