56 / EN
Dryer / User Manual
Maintenance and cleaning
C
Clean metal surfaces of the sen-
sors 4 times a year.
C
Do not use metal tools when
cleaning metal surfaces of the
sensors.
A
Never use solvents, cleaning
agents or similar substances for
cleaning due to the risk of fire and
explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water
tank. Drain the water tank after each drying
cycle.
A
Condensed water is not drinkable!
A
Never remove the water tank
when the program is running!
If you forget to drain the water tank, the ma-
chine will stop during the subsequent drying
cycles when the water tank is full and the
Water Tank warning symbol will flash. If this
is the case, drain the water tank and press
Start / Pause
button to resume the drying
cycle.
To drain the water tank:
• Pull the drawer and remove the water
tank carefully.
• Drain the water in the tank.
• If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
• Place the water tank into its seat.
C
If the direct water draining is used
as an option, there is no need to
empty the water tank.
6.4 Cleaning the filter drawer
Lint and fiber that could not be captured by
the lint filter are blocked in the filter drawer
behind the kick plate. Warning light lights up
periodically every 7 drying cycle maximum
for remi,nding purposes on the products with
filter drawer cleaning warning light
«
»
.
A filter drawer foam placed on plastic is avail-
able inside the filter drawer.
