Beko DDT39434CF User Manual Download

Page: 35 / 54

USA

Select Models:

Your machine performs water

softening depending on the

hardness level of the supply

water. Washing time can

change while the program

is running depending on the

ambient temperature where

your machine is installed,

temperature of the supply

water and amount of the

dishes.

Pay attention not to open the

door of the machine when it is

running. There may be a rush of

vapour when you open the door

of your machine; be careful.

The machine will be switched

off if no button is pressed

within 5 seconds after opening

the door while the machine is

running.

After the door has been

opened, if any button is pressed

within 5 seconds and the door

is closed, the selected program

resumes; otherwise, the

machine will be switched off.

Open the door after the

machine has been switched off,

press On/Off button and close

the door within 5 seconds. The

program will resume washing.

The machine will remain silent

in pause mode for some time

in order to remove the water

from the machine and on the

dishes completely and to have

the water softener cleaned, and

then it will resume running in

drying mode.

6.7 CANCELLING THE

PROGRAM

Open the door of the product press and

hold the Program Selection / Program

Cancel keys for 3 seconds. After the 3 -

2 - 1 countdown, 0:01 is displayed, close

the door of the product and wait for the

draining process complete. Draining is

completed in 2 minutes and the machine

gives an audible warning when it is

completed.

There might be residues of

detergent or rinse aid in the

machine and/or on the pieces

being washed depending on

the step the program you have

cancelled was in.

6.8 SALT INDICATOR ( )

(Select Models)

Please check the salt indicator on the

display to see whether there is adequate

amount of softening salt in the dishwasher

or not. You need to refill the salt reservoir

with salt whenever salt indicator appears

on the display of your machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

6.9 RINSE AID INDICATOR (

)

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid indicator

appears on the display of your machine.

Summary of Contents for DDT39434CF























































Search results

Summary of Contents for DDT39434CF

Reviews:

Related manuals for DDT39434CF

Brands by name

Popular brands

Beko DDT39434CF, User Manual

Search results

Summary of Contents for DDT39434CF

Reviews:

Related manuals for DDT39434CF

Brands by name

Popular brands