background image

6 / 28  EN

Dryer / User Manual

Important instructions for safety and environment

• You must provide enough ventilation in order to prevent gases exiting from 

devices operating with other types of fuels including the naked flame from 

accumulating in the room due to the back fire effect.

A

Underwear that contains metal reinforcements should not be dried

in the dryer. Dryer may be damaged if metal reinforcements come 

loose and break off during drying.

C

Use softeners and similar products in accordance with the 

instructions of their manufacturers.

C

Always clean the lint filter before or after each loading. Never 

operate the dryer without the lint filter installed.

• Never attempt to repair the dryer by yourself. Do not perform any repair 

or replacement procedures on the product even if you know or have the 

ability to perform the required procedure unless it is clearly suggested in 

the operating instructions or the published service manual. Otherwise, you 

will be putting your life and others’ lives in danger.

• There must not be a lockable, sliding or hinged door that may block 

the opening of the loading door in the place where your dryer is to be 

installed.

• Install your dryer at places suitable for home use. (Bathroom, closed 

balcony, garage etc.)

• Make sure that pets do not enter the dryer. Check the inside of the dryer 

before operating it.

• Do not lean on the loading door of your dryer when it is open, otherwise it 

may fall over.

• The lint must not be allowed to accumulate around the tumble dryer

Summary of Contents for DCY 9502 GXB3





























Reviews: