EN 24 / 32
Dryer / User Manual
C
When the programme selection switch is
turned while the tumble drier is running
and child lock is active, two beeps are
heard. If the child lock is cancelled
without restoring the programme
selection to switch to its previous
position, programme is ended because
the position of programme selection
switch is changed.
6.10 Changing the programme after
starting
After the tumble drier starts running, you may dry your
laundry in a different programme by changing the
selected program.
•
For instance, in order to select Extra Dry instead of
Iron Dryness program, select the Extra Dry program
by turning the On/off/program selection button.
Start the p rogram by pressing the Start/Pause button.
Adding or removing laundry during pause
If you want to add or remove laundry after the drying
program has started:
•
Put the tumble drier into Pause position by pressing
the Start/Pause button. Drying process stops.
•
Open the loading door in Pause position, and close
the door after adding or removing laundry.
•
Start the program by pressing the Start/Pause
button.
C
The process of adding laundry after
the start of drying process might lead
to mixing of wet laundry with the dried
laundry inside the tumble drier and some
damp laundry at the end of process.
C
Laundry adding and removing process
can be repeated as many times as
desired during drying. But this process
leads to extension in the program time
and increase in energy consumption
since it will repeatedly interrupt
the during process. Therefore, it is
recommended to add laundry before
starting the program.
C
If a new program is selected by changing
the position of program selection button
while the tumble drier is paused, the
running program ends.
Do not contact the inner surface of drum
while adding or removing laundry during
a running program. Surface of drum is
hot.
6.11 Cancelling the programme
When you want to cancel the programme and end the
drying process for any reason after the tumble drier has
started operation, the programme is cancelled by turning
the On/off/programme selection button.
A
WARNING:
When you cancel the
programme during the operation of
tumble drier, inner part will be extremely
hot; therefore, allow it to cool down by
running the airing programme.
6.12 End of programme
At the end of programme, Fibre Filter Cleaning and Water
Tank warning symbols on the programme monitoring
indicator turn on. Loading door can be opened, and the
tumble drier will be ready for a second operation.
In order to turn off the tumble drier, put the On/Off/
Programme selection button in On/Off position.
C
When the laundry isn’t removed after the
end of programme, 2-hour anti-creasing
function is enabled in order to prevent
creasing of laundry. Programme spins the
laundry at intervals of 10 minutes, and
prevents creasing.
C
Clean the fibre filter after each drying.
(See: “Fibre filter and Loading door inner
surface”)
C
Drain the water tank after each drying.
(See: “Draining the water tank”)
