
60 EN
1
Important safety information
This section includes safety information
that will help protection from risks of per-
sonal injuries or materialistic damages.
Failure to follow these instructions shall
cause any warranty and reliability commit-
ment to become void.
General safety
• Never place the machine on a carpet-
covered floor, otherwise, lack of airflow
beneath the machine may cause elec-
trical parts to overheat. This will cause
problems with your machine.
• If the power cable or mains plug is
damaged, you must call Authorised
Service Agent for repair.
• The product should not be plugged
in during installation, maintenance
and repair works. Such works should
always be made by the technical ser-
vice. Manufacturer shall not be held
responsible for damages arising from
processes carried out by unauthorised
persons.
• Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
• Operate your product at temperatures
b5°C and +35°C.
• Do not use electrical devices in the
product.
• Do not connect the air exit of the prod-
uct to the chimney holes which are
used for the exhaust fumes of the de-
vices operating with gas or other types
of fuel.
• You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
• Always clean the lint filter before or af-
ter each loading.
• Never operate your dryer without the
lint filter installed.
• Do not allow fibre, dust and dirt accu-
mulation around the exhaust exit and
at adjacent areas.
• Power cable plug must be within easy
reach after installation.
• Do not use extension cords, multi-
plugs or adaptors to connect the dryer
to power supply in order to decrease
the risk of electric shock.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a
qualified electrician change the socket
with a suitable one.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials
as well as the items that are contami-
nated or spotted with such materials
should not be dried in the product
since they emit flammable or explosive
vapor.
• Do not dry items cleaned with indus-
trial chemicals in the dryer.
• Do not dry unwashed items in the
dryer.
• Items soiled with cooking oils, ac-
etone, alcohol, fuel oil, kerosene, stain
remover, turpentine, paraffin and par-
affin removers must be washed in hot
water with plenty of detergent before
being dried in the dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower bon-
nets, water resistant textiles, materials
with rubber reinforcement and rubber
foam pads should not be dried in the
dryer.
• Do not use fabric softeners and anti-
static products unless they are recom-
mended by the manufacturers of the
fabric softener or the product.
• This product must be grounded.
Grounding installation decreases the
risk of electric shock by opening a
path with low resistance for the elec-
tricity flow in case of a malfunction or
failure. Power cable of this product
is equipped with a conductor and a
grounding plug that allows for ground-
ing the product. This plug must be
installed appropriately and inserted
into a socket which is grounded in ac-
cordance with the local laws and regu-
lations.
• Do not install the product behind a
1