4 EN
• This product must be grounded.
Grounding installation decreases the
risk of electric shock by opening a path
with low resistance for the electricity
flow in case of a malfunction or failure.
Power cable of this product is equipped
with a conductor and a grounding
plug that allows for grounding the
product. This plug must be installed
appropriately and inserted into a socket
which is grounded in accordance with
the local laws and regulations.
• Do not install the product behind a door
with a lock, sliding door or a door that
has a hinge against the hinge of the
dryer.
• Do not install or leave this product
in places where it will be exposed to
outdoor conditions.
• Do not tamper with the controls.
• Do not perform any repair or part
replacing procedures on the product
even if you know or have the ability to
perform unless it is clearly suggested
in the operating instructions or the
published service manual.
• Inside and exhaust duct of the product
must be cleaned by the qualified
service personnel periodically.
• Wrong connection of grounding
conductor of the product can cause
electric shock. If you have any suspect
about the grounding connection, have
it checked by a qualified electrician,
service representative or service
personnel.
• Do not reach into the machine when
the drum is spinning.
• Unplug the machine when it is not in
use.
• Never wash down the appliance with
water! There is the risk of electric shock!
Always disconnect by unplugging from
the mains before cleaning.
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out by grabbing the plug
only. Do not operate the machine if the
power cable or plug is damaged!
• Never attempt to repair the machine
yourself, otherwise, you will be putting
your life and others’ lives in danger.
• For malfunctions that cannot be solved
by following the information given in the
safety instructions:
Turn off the machine, turn off and
contact an authorised service agent.
• Do not stop the dryer before the drying
cycle comes to an end unless you will
remove all laundry from the dryer fast
in order to lay them and dissipate the
heat.
• Remove the door of the drying
compartment before decommissioning
or disposing of the product.
• The final step of the drying cycle (cool-
down cycle) occurs without applying
heat to ensure that the items are left
at a temperature that will not damage
them.
• Fabric softeners or similar products
should be used as specified by the
fabric softener instructions.
• Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result
if metal reinforcements come loose
during drying.
• Check all garments for forgotten
lighters, coins, metal pieces, needles,
etc. before loading.
• Remove all objects from pockets such
as lighters and matches.
• At times when your dryer is not in
use or after the laundry is taken out
following the completion of drying
process, turn off by using the On/
Off button. In cases when the On/
Off button is on (while the dryer is
energized), keep the door of the dryer
closed.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry
that are marked accordingly.
• Dry only those articles in your product
that are stated in this manual.
• This product is not intended to be
used by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
Summary of Contents for DCU 7330
Page 1: ...1 EN Dryer DCU 7330 X ...
